DIY Tile Granite You Can Install Yourself

DIY: Tile Granite You Can Install Yourself

Installing your own kitchen countertops can be a great way to save money on a kitchen remodel. If you plan to build your own counters, however, there are certain materials you should and should not consider based on the difficulty level involved. Granite tile is a great option for DIY counters, because it is an attractive and durable material that is also fairly easy to install. If you are thinking about building your own granite tile counters, review the installation process as outlined below.

Benefits of Granite Tile Counters

Benefits of Granite Tile Counters

If you like the look of granite counters but you don’t have an unlimited budget for your kitchen remodel, granite tile may be a good option for you.

 

Granite is a natural stone, so it is incredibly durable – this is one of the main benefits for this kitchen countertop material. Not only is granite resistant to heat, but it is also stain-resistant, water-resistant, and scratch-resistant. This material will last for decades, if you take good care of it, without wearing or growing dull. Additional benefits of granite tile include the following:

  • Granite is naturally resistant to bacteria.
  • Tile granite is easy to clean – you just need soap and water.
  • Granite comes in a variety of colors and patterns.
  • Tile granite is attractive and offers great options for a custom look.

Preparing for Installation

Preparing for Installation 2

Before you install your tiles, you will need to install your cabinet frames and cut a plywood frame to the size and shape of your counter.

 

If you’ve decided that granite tiles are the right kitchen countertop material for your DIY project, take the time to review the installation process to be sure you are up to the task. After installing the plywood frame, you should install a piece of cement backer board to create a water-resistant barrier under the tile. Once the backer board is in place, you should dry fit the tiles in place on top of the board to make sure you have the arrangement right. You will need to cut tiles to size and leave a 1/8-inch gap between the tiles – this gap will be filled with grout when you install the tiles.

DIY Installation Process

Preparing for Installation

When it comes time to install your granite tiles, you should begin working from one of the outside edges of the countertop.

 

Apply a thin layer of un-sanded grout to the cement backer board and wiggle the tiles a bit after setting them to remove any air bubbles. Work along that edge to the wall, then work along the wall, using plastic spacers to ensure a 1/8-inch gap between the tiles.

Fill in the entire surface of the countertop with tiles, using a level to ensure that tiles sit level with one another. After you’ve installed the tiles and the grout has dried, you’ll need to apply another layer of grout to fill in the gaps between the tiles. The final step in the installation process is installing a skirt around the edge of the counter to give it a finished look.

Granite tiles are an excellent option for DIY counters, because they are affordable and easy to install. If you want to achieve a custom look for your kitchen counters but you aren’t looking for a difficult installation process, consider granite tiles.